Introduction to Scene Mode for Reolink Home Hub

Scene Mode allows you to quickly enable or disable functions of all your Reolink devices connected to your Home Hub simply by switching the scene mode. This feature makes everything easier and more convenient.

Applies to: Reolink Home Hub, Hub 1, Reolink Home Hub Pro, Hub P1.

1. What is Scene Mode

Scene Mode allows your Home Hub to configure the connected devices automatically based on your selected mode. This means you can easily enable or disable functions for all devices by switching between modes in the Reolink app, including alert notification, sirens, recording, PTZ tracking, and other functions. There are three default modes: Disarmed, Home, and Away, each uniquely configuring your devices. You can customize these modes to suit your preferences. Additionally, you can create up to six scenes (including the three default modes), five of them allowing you to tailor the settings for each device, providing plenty of options to meet your needs. Scene Mode is undoubtedly a great feature that makes your life more convenient and secure.

Note: Specific functions of different devices may be different.

2. How to Set up Scene Mode

Three Default Modes

Disarmed: In this scene, all alarm notifications and recording functions will be disabled, and all defenses will be disarmed. This scene cannot be edited. It is recommended for use when you want to avoid interruptions from your cameras and do not require alarms or recordings.

Note: In Disarmed Mode, cameras will neither alarm nor record. Please ensure that you do not require these functions before activating this mode.

Home: In this scene, all devices enable recording, while alert notifications and siren triggering are disabled. It's recommended for use when you are at home to minimize disturbances.

Away: In this scene, all devices enable tracking and alarm notifications, providing comprehensive monitoring. It's recommended for use when you are away from home to keep everything under control.

Enable Scene Modes and Set up Alarm Settings of Cameras under Scene Modes

Step 1. Launch your Reolink app and go to the device settings of Home Hub.

Step 2. Tap Scene Modes and tap Next, then follow the guidance to enable the mode.

Step 3. After enabling the mode, tap “...” behind the mode you want to edit.

Step 4. Select the camera you want to edit, and you can enable/disable FTP, Email Aerts, Push Notifications, Home Hub Ring, and other functions now.

Note: You cannot edit the camera that is offline.

Step 4. You can repeat step 3 to edit your other cameras.

How to Access Camera Scene Switch

After enabling and setting up scene mode, you can easily switch scene mode of your Home Hub quickly. You just need to launch your app and go to the device settings of your Home Hub, and then select the scene you want at the top of the device settings page.

After switching, all devices connected to your Home Hub will be configured according to the scene you selected.

Disable Scene Mode

If you do not want to use Scene Mode and wish to disable it, simply tap Disable Scene Mode. Disabling will remove the scene switch button from the homepage of Home Hub, and all devices will return to their working state prior to the scene being activated.

Step 1. Launch your Reolink app and go to the device settings of Home Hub.

Step 2. Tap Scene Modes and tap Disable Scene at the bottom of the page to disable Scene modes.

Step 3. To check if the mode is enabled on your Home Hub, go to the device settings page and look for the scene selection interface at the top. If you see this interface, the mode is enabled; if not, it’s likely disabled.

Delete Scene Mode

If a Reolink Home Hub Scene Mode is configured incorrectly and needs to be recreated, or if a Scene Mode is no longer needed, you can follow these steps to delete it:

1. Go to the Scene Modes settings page.

2. Click the three-dot menu to edit Scene Mode. Tap the Delete button at the bottom.

3. Confirm the deletion by taping Delete again. Once you receive a success message, the Scene Mode has been successfully deleted.
   

• Note: Before deleting an unused Scene Mode, make sure to switch the camera to another Scene Mode first.
  

3. Important Notice of Scene Mode

Before enabling Scene, please ensure that the alert notifications, Siren, recording, PTZ tracking, and other functions on devices connected to Home Hub are enabled and properly configured; otherwise, these functions may not work correctly.

For example, if you enable recording for Camera A in the Home scene, but Camera A hasn't activated the recording function in its settings or its recording schedule doesn't include this period, then Camera A will not record.

If you need more help, please contact Support.