This article will show you the Wi-Fi network requirements for all Reolink Wi-Fi cameras and Reolink battery-powered Wi-Fi cameras.
Applies to: All Reolink Wi-Fi cameras and battery-powered Wi-Fi cameras.
|
Models |
Argus PT 2K | Argus 2 | Argus Eco |
All other Reolink Wi-Fi camera |
| Argus 3 2K | Argus 2E | Argus Pro | ||
| Argus PT Lite | Argus 3E | E1 | ||
| Lumus(hardware IPC_325C7) | Lumus(hardware IPC_NT1NO24MP) | |||
| Wi-Fi Frequency | 2.4Ghz ONLY | Both 5Ghz and 2.4Ghz | ||
Wireless Encryption |
WPA/WPA2 |
Note: Reolink cameras do not support the WEP encryption method as it is outdated and not secure. |
||
| Requirement for SSID/PSD |
SSID: No more than 31 digits Password: 8-63 digits (They may contain numbers, letters, special characters and spaces.) |
|||
| Router configuration requirements | Routers with all UDP ports opened, physical address filtering/whitelist function disabled and IP isolation disabled | |||
| Supported Equipment | wireless routers, hotspots without signing in, Wi-Fi extenders and the Wi-Fi of 4G routers | |||
Related Articles
- Introduction to Wi-Fi 6
- How to Initially Set up Reolink Devices
- Reolink Camera Won't Scan QR Code on the App/Client
- How to Add Reolink NVRs/Cameras to a New Phone
- How to Avoid Losing Wi-Fi Connection When Changing a Router or Router Wi-Fi Password
If you encounter any difficulties while connecting your Reolink Wi-Fi camera, please don't hesitate to reach out to the Reolink Support Team for assistance.