In this article, we’ll guide you through the steps to adjust the device order, making it easier to organize and access your device as needed. Please refer to the following steps.
Applies to: All Reolink devices.
Adjusting Device Order refers to arrange the order of devices displayed on the mobile App or PC Client. Please note that this applies to devices added directly to the App/Client, including standalone cameras, Reolink NVR, and Reolink Home Hub.
If you wish to adjust the camera order under the NVR/Home Hub, please click the relevant section to proceed.
1. Adjust Reolink Device Order via App/Client
2. Adjusting the Camera Order for Cameras Connected to Reolink NVR/Home Hub
1. Adjust Reolink Device Order via App/Client
-
Via Reolink App
Here is a video for your reference:
Step 1. Launch Reolink App and go to the App Settings page. Tap Adjust Device Order to adjust the display order of the cameras.
Step 2. In the "Adjust Device Order" screen, tap and drag the three-line icon to rearrange the device order.
Step 3. Tap the "Pin to Top" button to instantly move a camera to the top, without dragging.Once completed, this setting will apply to the device list order, multi-screen preview, and immersive preview order in the phone App. As shown below, the devices are arranged according to the order set above, with the E1 Pro at the top of the device list, followed by the Reolink Home Hub and RLC-812A. -
Via Reolink Client
In the Reolink Client, you can sort the cameras in both 1. device list and 2. camera preview screen separately. This order will remain effective even after restarting the client. The display order on the scrollview will follow the camera preview screen order.
1. Adjusting the Camera Order in Device List
Click and drag the camera to the desired position. As shown in the image, the NVR, which was originally pinned to the top, will move to the bottom once you drag it there and release your finger. The change will take effect immediately.
2. Adjusting the Camera Order in the Preview Screen
Step 1. Choose the camera that you want to move. Use your mouse's left button to drag it to the channel you want it to be.
Step 2. Release the button. Now camera is in the channel you want.
You can also drag the camera from the device list on the left directly to the channel you need. Click the split-screen button in the bottom right corner to switch between multiple screens.
For Reolink NVR/Home Hub users, if you want to adjust the order of cameras connected to the Reolink NVR/Home Hub on the preview screen. Click the triangle button to display all the cameras that are connected to the Reolink NVR/Home Hub. Then drag the camera to the channel where you want.
2. Adjusting the Camera Order for Cameras Connected to Reolink NVR/Home Hub
Reolink NVR
Method 1: Adjust the camera order through the channel list in the Reolink App. This change will only take effect on the app, refer to: How to Configure Channel List for Reolink NVRs via Reolink App.
Method 2: Arrange camera order via the connected monitor to the NVR with HDMI/VGA cable. This adjustment will take effect on all Reolink software. Refer to: How to Arrange the Display Order of Cameras on Reolink NVR (New UI).
Notes:
1. When the doorbell camera is connected to the NVR, it is by default displayed as channel 1 in the Reolink App, with no option to change it. This is because the doorbell is installed at the front door, which is considered a crucial surveillance area.
2. The channel order of the cameras on the NVR does not correspond directly to the network ports they are connected to, the channels are assigned randomly.