If you want to hear the sound of push notifications on Android phones while receiving a push notification, you can refer to the steps below.

Applies to: All Reolink devices.

This article will guide you in two sections, you can click to quickly access it.

1. Enable Push Sound

2. Customize Ringtones for Doorbell Camera

Note: You should Enable Push Notifications on iOS and Android Phones first.

1. Enable Push Sound

Step 1. Go to the Settings page on your phone.

Step 2. Tap Notification & Control center, and then select App notifications. Find Reolink App and tap it.

phone notificationnotification settingsReolink app notification

Step 3. Enable Show notifications.

Note: You can enable Allow Sound or Allow Vibration to ensure you receive push notifications. These settings do not contradict each other, so you can choose one or both according to your preference. The specific options may vary between different phones.

reolink notification second

2. Customize Ringtones for Doorbell Camera

Device Notification Ringtones, which is designed particularly for doorbell cameras and allows you to set a different push notification ringtone for visitor pressing the doorbell and for alarm motions. 

Note: This feature is currently only supported when the camera is running alone or added to Home Hub. It is not supported when the camera is connected to NVR.

Set up Push Notifications on Reolink App 

Launch your Reolink App, and go to the Device setting > Push Notifications. You can enable "Incoming call from Doorbell" and go to System Settings to set a ringtone for visitor pressing the doorbell, you can also enable "Device Notification Ringtones" and select Urgent/Important/General Notification for alarm according to your needs.

doorbell settingsdoorbell push notification

doorbell notification ringtones androidalarm ringtones android

Customize Urgent/Important/General Notification on Your Phone

You can set a different ringtone for each type of notification through your phone settings. First, follow steps 1 to 3 above to enable Push Sound, then follow the instructions below.

Scroll down to find options for Urgent Notification, Important Notification, and General Notification. Tap on one to set its ringtone by selecting Sound and choosing your preferred ringtone. Remember to configure each of the three notification types separately, allowing you to customize them as you wish.

doorbell notifications ringtoneurgent notificationsselect sounds

If you need more help, please contact Support.