Articles in this section

See more

How to Do Initial Setup for WiFi NVR on the Monitor

Avatar
April
  • Updated
Follow

Applies to: RLN4-211W; RLN4-210W

This article teaches you how to connect and initially set up your WiFi NVR with a connected monitor.

Here is a diagram that helps you know each option on the WiFi NVR.

buttons_on_wifi_nvr.png

Now, please refer to the following procedures to set up your NVR.

connection_diagram_on_wifi_nvr.png

 

Step 1. Connect the NVR to a Monitor or TV via VGA or HDMI cable.

initial_set_up_wifi_nvr_step_2.png

Step 2. Connect the mouse to the USB port.

initial_set_up_wifi_nvr_step_3.png

Step 3. Connect the NVR to the power supply and turn it on.

initial_set_up_wifi_nvr_step_6.png

Step 4. Power on the NVR and the camera. The system will connect automatically. The preview will be started after about 30 seconds.

initial_set_up_wifi_nvr_step_5.png

Note: If you want remote access via your phone/tablet/PC, you need to connect the NVR to the router.

initial_set_up_wifi_nvr_step_6.png

Step 5. During the startup, you will see the below splash screen. System booting up takes a few seconds.

link_your_real_world.png

 Step 6. And then you need to follow the Setup Wizard to set up your NVR by clicking button.png to continue and click Finish to save your settings at the latest step.

wizard_on_wifi_nvr.png

Wizard Setup

  • Create your password
  • Choose a language, resolution, video Standard, and check QR Code/UID
  • Setup time zone
  • HDD Management
  • Email Configuration (Gmail is suggested to use the sender one)
  • Camera List

Related articles

Comments

0 comments

Article is closed for comments.