Here we'll guide you to quickly check the firmware version of your Reolink cameras via a web browser.

Applies to: All Reolink NVRs.

Step 1. Log into your NVR via Web Browser.


Step 2. Click the gear icon on the top right to get to the device settings page.


Step 3. Click System > Info, then you can check the hardware and firmware version of your NVR. 


If the user interface of your NVR is an old version, you could refer to the steps below: 

Step 1. Log in to your NVR via a web browser and go to the device settings page. 

Step 2. Click System > Information, then you can check the system information of your NVR. 


You may also refer to the following methods to find out the firmware information of your Reolink products.