How to Set up Video Loss Buzzer for PoE NVR

You are able to set the PoE NVR to buzz (beep) when any of the camera's video loss, which is sometimes an efficient way to alert you.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

On the NVR monitor, go to Menu > Alarm >Video Loss, select a channel, check Enable, click Set next to Action, and tick Buzzer for the selected camera (channel). Click Apply to save the settings.

Note: You can click the Email Settings to set the email alert for selected cameras (channels) when video lost.

Helpful？

Thanks for your feedback! You can click again to cancel and feed back again.

Yes

Sorry about that. We'll be grateful if you can provide some advice.

Thank you for your feedback. Please leave your email address so that we can get in touch with you when necessary.

I've read and understood the Terms & Conditions and Privacy Policy , and I understand that Reolink will use my personal data (email) to facilitate my authentication.

submit

You have clicked too often. Please try again tomorrow.