This article is going to tell how to receive push notifications during the period you want by setting up the push schedule via Reolink App.
Applies to: All Reolink cameras and NVRs except Argus 2, Argus Pro, Argus 2E 2MP, Argus 3 2MP, Argus PT 2MP, Argus Eco 2MP, Reolink Go, Reolink Go PT, B400, D400, B800, D800.
Please note that for the battery-powered cameras without the person/vehicle detection function, you can only enable/disable the push button. The push schedule is the same as the PIR schedule.
For the other IP cameras, refer to the following steps to set the push schedule via Reolink App.
Push Schedule
Step 1. Launch the Reolink App > Device Settings > Push Notifications.
Step 2. Enable Push Notifications > Choose Schedule > Customize detection type and schedule for push notifications.
Please note that you can set a push schedule for animal detection, but not vehicle for KEEN Ranger PT.
Select the time column to Enable the schedule page of each day, you will see two options at the bottom: Enable and Disable. You may choose one of them, then you click each grid to set the push schedule up.
- One grid represents one hour.
- Tap Copy to copy the same schedule settings to other days.
- You can set different detection types for your camera, but the detection types will vary from different models. For the model which does not support smart detection, there is no detection type that can be chosen.
Step 3. Press the Save button on the top right to save the settings.
Critical Alerts
On the iOS app, you can set to receive critical alerts when your iPhone is muted or Do Not Disturb is on.
When you enable Allow Critical Alerts, there is a message that will pop up to guide you on how to set the critical alerts on your iPhone.
Please tap Settings.
Then choose Notifications on your iPhone, and enable Critical Alerts.
