You can receive push notifications during the period you want by setting up the push schedule.
Applies to: All Reolink cameras and NVRs except Argus 2, Argus Pro, Argus PT, Argus Eco, Go, Go PT, Argus 2E, B400, D400, B800, D800.
Please note that for the battery-powered cameras without the person/vehicle detection function, you can only enable/disable the push button. The push schedule is the same as the PIR schedule.
For the other IP cameras, you may refer to the following steps to set the push schedule via Reolink App.
Push Schedule
Step 1. Launch the Reolink App > Device Settings > Push Notifications.
Step 2. Enable Push Notifications > Choose Schedule > Customize detection type and schedule for push notifications.
Please note that you can set a push schedule for animal detection for Keen Ranger PT.
Select the time column to Enable the schedule page of each day, you will see two options at the bottom: Enable and Disable. You may choose one of them, then you click each grid to set the push schedule up.
- One grid represents one hour.
- You may click Copy to copy the same schedule settings to other days.
- You can set different detection types for your camera, but the detection types will vary from different models.
Step 3. Press the Save button on the top right to save the settings.
Critical Alerts
On the iOS app, you can set to receive critical alerts when your iPhone is muted or Do Not Disturb is on.
When you enable Allow Critical Alerts, there is a message that will pop up to guide you on how to set the critical alerts on your iPhone.
Please click Settings.
Then choose Notifications on your iPhone, and enable Critical Alerts.
Comments
0 comments
Article is closed for comments.