Applies to: All Reolink cameras except battery-powered ones.
Here we will guide you to quickly set up motion sensitivity on Reolink Client following the two steps below.
Step 1: Launch Reolink Client and log in to the camera, then go to Device Settings ->Alarm-> Motion.
Step 2: Check the Enable and set the 4 time periods and corresponding sensitivity. Please do not forget to click Save to save the settings.
Note: The Sensitivity setting is controlled by a slider, allowing you to set a value between 1 to 50. The lower the numerical value is, the more sensitive the motion detection will be.
You may also configure motion sensitivity using other methods. Check details in: