How to Set up Motion Detection Sensitivity via Reolink Client (Mac)

Applies to: All Reolink cameras except battery-powered ones.

Here we will guide you to quickly set up motion sensitivity on Reolink Client following the two steps below.

Step 1: Launch Reolink Client and log in to the camera, then go to Device Settings ->Alarm-> Motion.

Step 2: Check the Enable and set the 4 time periods and corresponding sensitivity. Please do not forget to click Save to save the settings.

Note: The Sensitivity setting is controlled by a slider, allowing you to set a value between 1 to 50. The higher the numerical value is, the more sensitive the motion detection will be.

You may also configure motion sensitivity using other methods. Check details in:

• How to Set Up Motion Sensitivity via Reolink Client (Windows)

• How to Set up Motion Detection Sensitivity via Web Browser
• How to Set up Motion Detection Sensitivity via Reolink App
• How to Set up Motion Detection Sensitivity via Reolink PoE NVR
• How to Set up Motion Detection Sensitivity via Reolink WiFi NVR