Here we'll guide you to quickly check the firmware version of your Reolink cameras via a Web Browser.

Applies to: All Reolink cameras except battery-powered cameras, Reolink E1, Reolink E1 Pro, and Reolink Lumus.

Note: The steps below only apply to standalone cameras. If your camera is directly connected to Reolink NVR, please check its system information on the NVR via a monitor. See: How to Find out System Information via Reolink NVR (New UI).

Step 1. Log in to your camera via Web Browser.

log-in-on-IE-browser.png

Step 2. Click the gear icon on the top right to get to the device settings page.

click_the_settings_icon.png

Step 3. Click Camera > Info. Then you can check the model, UID, hardware, and firmware No. etc on the page.  

System_info__web.png

If the user interface is with an older version, please check the steps below. 

Step 1. Log in to your camera via a web browser and go to the device settings page.

Step 2. Click  System > Information, then you can check the Hardware Ver. and Firmware Ver. of your camera. 

system_information_old_ui.png

You may also refer to the following methods to find out the firmware information of your Reolink products.