Applies to: All Reolink cameras/NVRs (exclude Reolink Battery-powered cameras, Reolink E1, Reolink E1 Pro, Reolink Lumus and the cameras in the NVR Kit).
Note: Please make sure you've enabled the Push via your phone.
Step 1: Connect your camera to the network of your router.
Notes:
- The camera needs to be powered on.
- Make sure that your PC is in the same local network with the router. If it's in a different network, you need to use the Wan IP of your router to log into the web management page of your camera.
Step 2: Log in your camera via Web Browsers and go to the Device Settings page.
Step 3. Go to Network->Advanced->Push page, set push schedule for your device, and click OK to save the setting.
Comments
0 comments
Article is closed for comments.