Applies to: All Reolink cameras and POE NVRs except the battery-powered ones.
You may follow the steps below to remotely access Reolink products via DDNS.
Step 1. Launch the Reolink Client and go to Device Settings->Network Advanced->DDNS page.
Step 2. Enable DDNS and choose No-IP or DynDNS as the DDNS Server type. Then input the Domain name, User Name, and Password and click Save to save the settings.
Note:
- We supported both DDNS Server Type: No-IP and DynDNS.
- Check the Media port of your Reolink device and forward the Media port on the router interface. If you meet the problem when you forward the port for your product on the router, you can contact the router supplier for further assistance.
Comments
0 comments
Article is closed for comments.