Applies to: All Reolink cameras and NVRs (exclude Battery-powered cameras).
Step 1: Connect your camera to the LAN port of the router by an Ethernet cable.
- The camera needs to be powered on.
- Make sure that your PC is in the same local network with the router.
Step 2: Log in your camera via Web Browsers and go to the Device Settings page.
Step 3. Go to Network->Advanced->NTP page.
Step 4. Click the Synchronize and you may get the NTP settings succeeded message at the bottom, then it synchronizes succeeded. If it fails, please contact the support team for help.