This article will show you how to set up network general settings via Reolink PoE NVR with a monitor connected.

Applied to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Log into your Reolink PoE NVR on the monitor, and then go to Menu > NetworkGeneral.


And then you can set up the network's general settings here. There are 2 options under Network Access:  Static, DHCP.

Note: This Network Access is set as DHCP by default, you can change it to Static if you want to assign a static IP address for your camera.