Applies to: RLC-410-5MP; RLC-410S; RLC-411; RLC-411-5MP; RLC-411S; RLC-411S-5MP; RLC-420;RLC-420-5MP; RLC-422-4MP; RLC-422-5MP; RLC-423; RLC-423S; RLC-511; RLC-520; C1; C1 Pro; C2; C2 Pro; E1 Zoom; RLC-210W; RLC-410W; RLC-410W-5MP; RLC-410WS; RLC-411WS; RLC-411WS-5MP; RLC-422W; RLC-423WS; RLC-511W;RLC-422W-5MP; RLN4-211W;RLN4-210W; RLN16-410;RLN8-410;RLN8-410-E
Here we'll guide you to configure record settings for Reolink cameras via Reolink Web Browser.
The Recording page mainly includes two parts: Encode page and Advance page.
On this page, you can edit the parameters for the Clear Stream and the Fluent Stream.
On this page, you can enable Overwrite and choose the Post-Record duration. You may also set up a Schedule for your recording.
1. The Overwrite button is ticked by default, and under this model, the new recordings will cover the old videos automatically if the micro SD card is full.
2. If you want to extend the record time after the motion events happened, you can choose the Post-Record button to set the time.
3. The green grid means that the device will record to micro SD card/NVR when motions detected, while the white one means “don’t record”.
4. The recording schedule of C1, C2, C1 Pro, C2 Pro, and cameras that are connected to NVR could be set as continuous record.
Comments
0 comments
Article is closed for comments.