Applies to: Reolink PoE NVRs
Here introduce 4 methods to search recordings on PoE NVR. Refer to Method 2,3&4 if you need to check motion events over constant recording.
Method 1:
Step 1. Go to “Menu“->”Playback” page.
Step 2. Set the “Channel“, “Video Type” and “Start/End Time” you want to playback. Then click “Play” to playback.
There are 4 “Video Type” options: “All”, “Manual”, “Schedule” and “Motion”.
- “All” — all video types.
- “Manual” — videos recorded manually.
- “Schedule” — videos recorded as scheduled.
- “Motion” — motion detection recording videos (Check detailed steps on how to set up motion detection recording on PoE NVR).
Method 2:
Step 1. Go to “Menu“->”Playback” page.
Step 2. Set the “Channel“, “Video Type” and “Start/End Time” you want to playback. Then click “search” to play a certain part of the recording.
Method 3:
Step 1. Go to “Menu“>>”Playback” page, and click “Detail” button to show the Date/Time-Channels recording table.
Step 2. Choose the date and click “Search” to show the recordings in each channel, then click the cell in the table you want to play.
Step 3. Select the channel(s) for synchronous playback, then click “OK” to play.
Method 4:
Step 1. Go to “Menu“->”Event” page, and choose the "Channel" and set the "Event type", "Start Time" and "End Time".
Step 2. And then you can click the "Search" to choose a recording to play within the configured time.
Comments
0 comments
Article is closed for comments.