For Reolink WiFi cameras with LAN ports but without voice prompt, here is a simple guide for you to get the initial setup done.
Applies to: RLC-510WA, RLC-410W, RLC-511W, RLC-511WA, RLC-523WA, RLC-542WA, Reolink Duo WiFi, Reolink Duo 2 WiFi, Reolink Duo Floodlight WiFi.
For initial setup, please power on this camera with a DC adapter and also connect the camera to your router LAN port with an Ethernet cable, and then follow the steps to set up your camera. Please make sure your camera and your phone are on the same network.
Step 1. Tap the icon on the top right corner.
Note: If you've enabled the Add Device Automatically option on the App's Settings page, you can click this device on the Devices page and turn to Step 3 directly.
Step 2. Scan the QR code on the back of the camera. You may tap Light to enable a flashlight when setting up the camera in a dark environment.
If the phone doesn't respond, please tap Input UID/IP and then manually type in the UID (16-digit characters under the QR code of the camera). Then click Next.
Step 3. Create the password for your camera. Then click Next.
Step 4. Name your camera. Then click Next.
Step 5. Tap the WiFi network you want to join, and enter the password of the WiFi network.
Then tap Save to save the network configuration.
Step 6. Done! The initialization of your camera is finished.