This article will show you how to set up the encoding settings including the resolution of the camera, frame rate, and max bitrate via PoE NVR on the monitor.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Step 1. Log in to the NVR and go to Menu > Recording > Encode page.



Step 2. Select the channel (Camera No.) you need and change the settings as you need. Then you may click the Copy to to copy the same settings to other channels and click Apply to save the settings.

Note: For the Encoding Parameters/Resolution/Max. Frame Rate/Max. BitRate, please refer to How to Set up the Record Encode for Reolink Cameras.