OSD(On-screen Display) refers to the position of the camera name and date, as well as the watermark. Here we will guide you to set up OSD for your cameras via a web browser.

Applies to: All Reolink cameras (Reolink E1, Reolink E1 Pro, and Reolink Battery-powered camera excluded).

Step 1. Log in to your camera via a web browser. Click the gear icon on the top right to get to the device settings page.

log-in-on-IE-browser.png

Click_settings_icon_web.png

Step 2. Click Camera > Display. Then you can set up the position of the Camera Name, Date & Time. You can also choose to hide or display the Watermark of Reolink. 

osd_on_web_new.png

If the web interface of your camera is an old version, you can refer to the steps below. 

Step 1. Log in to your camera via a web browser and go to the device settings page. 

Step 2. Go to Display > OSD.

web_osd.png

Step 3. Change the OSD settings as you need.

Note: The Mask only supports up to 4 areas on the screen. For Reolink Duo PoE/WiFi, TrackMix PoE/WiFi, and RLC-81MA, the number will be doubled since you can draw masks for the two lenses respectively.