Learning the Buttons on Live View Page of Reolink Client (Windows)

Applies to: All Reolink Cameras and NVRs

Here is the brief introduction for the buttons on the Live View Page of Reolink Client (Windows):

The Live View page could be divided into 6 parts:

• Program Status Bar
• Program Settings Bar
• Video Windows
• Device List Area
• Quick Operation Area
• Shortcut Bar

Program Bar:

1. : shows the version No. of the Reolink Client.
2. : shows the current time of your PC.
3. : shows the current Ethernet port throughput.
4. : click to show the system network status.
5. /: click to lock or unlock the Reolink Client.

Program Settings Bar:

1. /: click to switch to Live view/Playback page.
2. /: shows the RAM and CPU usage of the current PC.
3. : click to go to the Local Settings page.
4. : click to show the program version.

Video Windows:

1. : shows the camera detected a motion.
2. : shows the camera was recording (including schedule/manual record).
3. /: shows the camera is connected via WiFi or Ethernet cable.
4. /: click to center/stretch the image to the full window.
5. : click to use the digital zoom.
6. : click to capture the current image in the stream.
7. : click to start manual record.
8. /: click to start/stop previewing.

Device List Area:

1. /: click to fresh or log out the device.
2. : shows the NVR channels.
3. : click to play the preview stream.
4. : click to enter the Device Settings page.
5. : click to edit the login information.
6. : click to delete the device.

Quick Operation Area:

1. : click to show the PTZ control panel.
2. : click to show the Image Basic Settings.
3. : click to show the Image Advanced Settings.
4. : click to enable/disable the video clip.

Shortcut Bar:

1. : click to play/stop all the channels.
2. : click to capture/record for all the channels.
3. : click to enter previous/next page for previewing.
4. : click to start touring for all the channels.
5. : click to enable/disable the two-way audio.
6. : move the slider to adjust the volume.
7. : click to divide the screen for multiple windows for the cameras.
8. : click to enter the full screen, right click on the screen or hit ESC on the keyboard to exit full screen.