Applies to: Reolnik WiFi NVRs.
Step 1. Log into your Reolink WiFi NVR and go to Menu -> Motion and select the Channel (Channel1), then check Enable.
Step2. Click Motion Detection to enter motion detection areas page (covered by the red grid) and right-click the interface to go to the Sensitivity settings page.
You may set the sensitivity higher at night and lower the value in the daytime to reduce false alarms. Click Apply to save the settings.
Besides Reolink WiFi NVR, you can also use the following methods to set the motion detection sensitivity:
Comments
0 comments
Article is closed for comments.