If you want to format the HDD or check the HDD status of your NVR on the monitor, refer to the guides below.

Applies to: All Reolink NVRs.

New UI

For RLN8-410 (hardware version H3MB18/N2MB02/N3MB01/N7MB01), RLN16-410 (hardware version H3MB18/N6MB01), RLN36 and RLN12W.

Step 1. Log in to your NVR via the monitor, and go to the Settings page.

settings.png

Step 2. Go to the Storage page. Choose the HDD you want to format and click on the Format button to format it.

format_HDD.png

Old UI

For RLN8-410 (hardware version H3MB02/H3MB16), RLN16-410 (hardware version H3MB02).

Step 1. Log in to your NVR via the monitor, and go to Menu > Device > HDD page.

Step 2. Choose the HDD you want to format and click on the Init button to format it.

format_hdd_on_poe_nvr.png

Note: The S.M.A.R.T option is designed for the support team to check the information. Customers do not need to pay close attention to this option.