Applies to: Reolink Argus, Argus 2, Argus pro
Step 1. Power off the camera by taking out the batteries before inserting the SD card.
Step 2. Insert the micro SD card in the micro SD card slot on the right side of the camera. Please use your fingernail (or use the provided reset needle) to push the SD card in until you feel it is locked, and you will hear a click sound and the micro SD card will not pop out if the camera is inserted in properly.
Note: Please do use something sharp to push the micro SD card in until you feel it’s locked, otherwise, the micro SD card will not be recognized. You could use your finger or the needle or you could refer to the video below to install the micro SD card.
a. The micro SD card should be installed in a correct way like the picture below.
b. If not locked properly in the slot, the micro SD card will pop out like the picture below, thus it will not be recognized by the camera, please note.
Step 3. Power on the camera by putting batteries back into the camera.
Here is a video for your reference: