Follow the steps below to set up auto reboot on the monitor of your PoE NVR.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Step 1. Log in to your PoE NVR, and then go to Menu > System > Maintenance.

Step 2. Check Enable auto reboot, and set up the time and date of the auto reboot accordingly.

Step 3. Click Apply to save the settings.

POE-main-menu.jpg

Maintenance Page

Notes: Once a standalone camera is connected directly to the NVR, the NVR's auto reboot settings will be applied to it. And the camera's own auto reboot settings will not take effect.