Reolink Argus, Argus 2, Argus Pro and Keen.
Some of you will find out that you don't have a cell phone to configure the newly purchased battery powered camera. Luckily, we can use the latest Mac Client(220.127.116.11) to configure it.
Click on the link below to download the Mac Client on your computer and install if you haven't downloaded, yet.
Then follow the steps below to configure:
Step 1. Launch Reolink Client application on your Mac and then click on Add Device.
Step 2. Enter the UID of the camera and press "Ok". You may refer to this to find the UID of your camera. Find UID of Reolink Products
Step 3. The camera will show up in the Client. Click on WiFi symbol.
Step 4. Check if you hear " Please run the app, add the camera and set it up" voice command. If you do, click YES.
Step 5. Type in the SSID and password of your wireless network.
Step 6. Face the lens of the camera to the WiFi QR code generated on your Mac screen to scan it. Click YES if you hear "Scan Succeeded".
Step 7. Then the camera will be configured and added successfully to the Reolink Client installed on your Mac.