Applies to: All Reolink cameras and NVRs
If your cameras/NVRs are not on the same LAN with your PC (as in on the different network), you may follow this guide to add the camera via UID/Domain/IP.
Note:
1. We suggest using the UID for the remotely access.
2. If you're using the Domain/IP to access the cameras, please ensure port-forwarding settings on your router are correct. See how to forward ports on your router interface.
3. Battery-powered cameras only support UID for remote access.
Click Add Device, select UID as Register Mode, then fill the blanks with the UID of your camera, the User Name (admin by default) and the Password (blank by default), and the Device Name (anything you like). After that, hit OK to add your camera to Reolink Client.
Comments
0 comments
Article is closed for comments.