The Reolink WiFi cameras except for battery-powered ones.
Configure Wireless Settings on Reolink Client:
Step 1. Plug the camera into the router’s LAN port by an Ethernet cable. Make sure the camera is powered on.
Step 2. Make sure your PC is on the same local network with the router, launch the Reolink client software and login to your camera. Click on Device Settings.
Step 3. Click on Network--> Wi-Fi.
Step 5. Click on Scan, then double-click on the SSID you would like to connect and input its password. You can click on the little eye icon to make the password display to confirm it.
Step 6. Click on Wi-Fi Test after it shows Wi-Fi Test Succeed, click Save to save the settings.
Step 7. Please disconnect the Ethernet cable between the camera and the router. Wait for a moment, the camera will connect to the router via Wi-Fi.