Applies to: Reolink WiFi cameras except for battery-powered ones, Reolink Lumus, E series
The following steps describe how to set up wireless settings for WiFi cameras on Mac Client. You may follow them to connect your cameras to the router via WiFi.
Step 1: Connect your camera to the LAN port of the router by an Ethernet cable.
1. The camera needs to be powered on.
2. Make sure that your PC is in the same local network with the router.
Step 2: Launch Reolink Client and login into your camera, then click on Device Settings.
Step 3: Click on Network--> Wi-Fi.
Step 4: Click on Scan, then double-click on the SSID you would like to connect and input its password.
Note: You can click on the little eye icon to make the password display to confirm it.
Step 5: Click on Wi-Fi Test. After it shows WiFi-Test Succeed, then click Save to save the settings.
Step 6: Please disconnect the Ethernet cable between the camera and the router. Wait for a moment, then the camera will connect to the router via Wi-Fi.
You can also finish the WiFi configuration on Windows Client and Reolink App. For more information, see:
- How to Configure Wireless Settings via Reolink Client (Windows)
- How to Configure WiFi Settings via Reolink App
Comments
0 comments
Article is closed for comments.