How to Set 24/7 Recordings via Reolink Client (Mac)

Applies to: All Reolink cameras except battery-powered cameras.

If you do not use an NVR, you may refer to the following two methods to set 24/7 video recording.

• Set 24/7 Recording on Your Computer
• Set 24/7 Recording in FTP Server

Method 1. Set 24/7 Recording on Your Computer

Notes:
1. When using computer for 24/7 recording, you need to keep the computer and Reolink Client on for 24/7.
2. The continuous recording may affect your PC performance.
3. The manual record is not available when scheduled normal recording to local is enabled.

Step 1. Launch Reolink Client and log in to your camera, then go to Local Settings -> Local Record page.

Step 2. Check the Enable Local Record Schedule box.

Step 3. Click on Normal option and then schedule recording 24/7 for your camera.

Method 2. Set 24/7 Recording in FTP Server

Step 1. Set up FTP Server via Reolink Client (Mac).

Step 2. Go to the Schedule page to set the 24/7 recording and click Save to proceed.

Note: Normal means that the camera will keep recording for 24/7 and M.D means that the camera will only record when motion is detected.