Here are guidelines on how to install the security mount and install the camera with a hook or loop strap.

Applies to: Argus 2, Argus Pro

To install a security mount for Reolink Argus series cameras, here is a video for your reference:

Install the Security Mount

Step 1. Press the button to release the plate from the security mount.

1.release_the_plate.png

Step 2. Screw the bolts to fix the security mount plate on the wall.

2.screw_the_plate.png

Step 3. Install the security mount on its plate (Make sure the top edge of the backing plate is inserted into the mount).

3.fix_mount_to_plate.png

Step 4. Press the security mount button until its plate clicks into the mount.

4.press_button_to_click.png

Step 5. Screw the camera to the security mount, then adjust its direction and tighten the screw to fix it.

5.screw_the_camera.png

Uninstall the Security Mount

Step 1. Press the security mount button to pull the mount from its plate.

1.press_button_to_reomve_mount.png

Step 2. Unscrew the camera from the security mount.

2.unscrew_camera.png

Install Argus/Argus pro/Argus 2 with a Hook & Loop Strap

Step 1. Press the button to release the plate from the security mount.

6.png

Step 2. Mount the hook & loop strap.

  • Thread the hook & loop strap through the slots of the mounting plate.
  • Fasten the wrap strap to the tree.

1.png2.png

Step 3. Latch the security mount on its plate.

Note: Make sure the top edge of the backing plate is inserted into the mount.

3.png

Step 4. Press the security mount button until its plate clicks into the mount.

4.png

Step 5. Screw the camera, adjust its direction, and tighten the knob to fix it.

5.png