Applies to: All Reolink Cameras.
The following steps describe how to set the encode settings via Mac Reolink Client.
Step 1: Launch Reolink Client and log in to the camera, then go to Device Settings > Encode page.
Note: The Audio can be enabled only if the device supports this function.
Step 2: Select the Stream Type, then change the video parameters and click OK button to save the settings.
Notes:
- If you changed the Resolution and saved the settings, the camera would reboot.
- You need to enable Audio for both Clear and Fluent stream type separately.
You may also configure the encode settings by using other methods. Check details in:
Comments
0 comments
Article is closed for comments.