Applies to: All Reolink cameras with micro SD card or SD card slot except battery-powered cameras.
Here we'll guide you to quickly set record schedule via Reolink Mac Client.
Note: Before setting, you have to check whether the micro SD card is recognized by the camera.
Step 1: Please click on Device Settings > Record button.
Step 2: Go to the Record Schedule interface, then choose the time grids during which you want the camera to record.
Notes:
1. The green grid means that the device will record to SD card when motions detected, while the white one means “don’t record”.
2. The recording schedule of C1, C2, C1 Pro and C2 Pro and camera connecting to the NVR could be set as the continuous record, while others start to record videos only when motions detected.
1. The green grid means that the device will record to SD card when motions detected, while the white one means “don’t record”.
2. The recording schedule of C1, C2, C1 Pro and C2 Pro and camera connecting to the NVR could be set as the continuous record, while others start to record videos only when motions detected.
Step 3: When you finish setting up the record schedule, click Save button.
You may also configure record schedule of Reolink cameras via Reolink App or Reolink Windows Client. Check details in:
Comments
1 comment
Buonasera Karen,
grazie di tutto, ho controllato la configurazione della fotocamera ed è ok, non registra nulla sulla scheda SD ma registra sul disco fisso del mio Mac
Grazie
tanti auguri
Article is closed for comments.