Applies to: All Reolink devices except battery-powered cameras, Reolink Lumus, Reolink E1, Reolink E1 Pro, add add-on cameras.
Here we'll guide you to upgrade firmware for Reolink cameras/NVRs via a web browser.
Note: Please make sure that you have already downloaded the firmware (choose the correct model and version according to your devices) from Reolink Download Center and unzipped the .pak file before upgrading.
Step 1. Launch Reolink Client in a web browser and log in to your cameras/NVRs, then go to Device Settings -> System -> Maintenance page.
Step 2. Select the correct file and click on Upgrade to update the firmware.
Notes:
- You may check/uncheck the box next to Update Configure File to restore/keep the configurations.
- You may fail to access the Device Settings after the firmware upgrade with the prompt "App detected that firmware of your device has been upgraded, now it will reload this App". Under that circumstance, you could delete the browser cache and try to access the device settings page again.
Besides the web browser, you may also update firmware for Reolink Cameras/NVRs by using other methods. Check details in:
Comments
0 comments
Article is closed for comments.