Applies to: Reolink WiFi cameras except battery-powered ones.
If you want to connect your wireless cameras to the router by WiFi via Reolink App, you may refer to the following steps.
Step 1: Plug the camera into the router’s LAN port with an Ethernet cable.
Note: Make sure that the camera is powered on.
Step 2: Launch Reolink App and log in to the camera, then enter the Device Settings interface and roll down the page to find Wi-Fi and click on it.
Step 3: Select the Network you would like to connect your camera to, then input the password and click OK button. Tap on Wi-Fi Test to test the connectivity.
Step 4: If it shows the success prompt "Reolink: The information you input can achieve normal connection", then you can tap on the Save icon on the top right-corner to save the settings.
Step 5: Disconnect the Ethernet cable between the camera and the router. Wait for a moment and the camera will connect to the router via Wi-Fi.
If you want to set up WiFi settings for Reolink cameras by using other methods. See: