Setting up WiFi for your WiFi cameras is simple, please scroll down for a step-by-step guide.
Applies to: Reolink WiFi cameras except for battery-powered cameras, E series, Reolink Lumus
Here is a video for your reference:
Step 1. Plug the camera into the router’s LAN port with an Ethernet cable.
Note: Make sure that the camera is powered on.
Step 2. Launch Reolink App and log in to the camera, then enter the Device Settings->Wi-Fi interface.
Step 3. Select the Network you would like to connect your camera to, then input the password and click the Save button.
Step 4. Disconnect the Ethernet cable between the camera and the router. Wait for a moment and the camera will connect to the router via Wi-Fi.
If you want to set up WiFi settings for Reolink cameras by using other methods. The following articles may be helpful:
Comments
0 comments
Article is closed for comments.