Applies to: Reolink WiFi cameras except battery-powered ones, E series,Reolink Lumus
If you want to connect your wireless cameras to the router by WiFi via Reolink App, you may refer to the following steps.
Step 1: Plug the camera into the router’s LAN port with an Ethernet cable.
Note: Make sure that the camera is powered on.
Step 2: Launch Reolink App and log in to the camera, then enter the Device Settings->Wi-Fi interface.
Step 3: Select the Network you would like to connect your camera to, then input the password and click Save button.
Step 4. After the loading window to be popped up disappears, disconnect the Ethernet cable between the camera and the router. Wait for a moment and the camera will connect to the router via Wi-Fi.
If you want to set up WiFi settings for Reolink cameras by using other methods. See: