Applies to: All Reolink cameras and POE NVRs except the battery-powered ones
You may follow the steps below to remotely access Reolink products via DDNS.
Step 1. Launch the Reolink Client and go to Device Settings >> Network Advanced >> DDNS.
Step 2. Enable DDNS and choose no-IP or DynDNS as the DDNS Server Type. Then input the Domain name, User Name, and Password and click OK to save the settings.
Notes:
1. Reolink supports both no-ip and DynDNS.
2. If the DDNS isn't working, please check the Media port of your Reolink device and forward the Media port on the router interface. If you have problems forwarding ports for your product on the router, please contact the router supplier for further assistance.
1. Reolink supports both no-ip and DynDNS.
2. If the DDNS isn't working, please check the Media port of your Reolink device and forward the Media port on the router interface. If you have problems forwarding ports for your product on the router, please contact the router supplier for further assistance.
Comments
0 comments
Article is closed for comments.