When you are away from the location where the NVR is mounted, still want to connect the NVR and check the cameras via Reolink App or Client? If yes, the below guides will help you.

Applies to: All Reolink NVRs

Before the setup, please ensure that your device is connected to the Internet and that the UDP ports are open.

Step 1. Connect your NVR to the LAN port of your router with an Ethernet cable.

Step 2. Enable UID for the NVR:

Step 3. Enter the UID and password to log into your NVR via Reolink software remotely. Refer to: