Applies to: All Reolink cameras and NVRs
If your cameras/NVRs are not on the same network (LAN) with your PC, you may follow this guide to add the cameras/NVRs on Reolink Client via UID/Domain/IP.
Notes:
1. We suggest using the UID for the remotely access.
2. If you're using the Domain/IP to access the cameras, please ensure the port-forwarding settings on your router are correct. See how to forward ports on your router.
3. Battery-powered cameras only support remote access via UID .
Click Add Device, select UID as Register Mode, then fill in the blanks with the UID of your camera, the User Name (admin by default) and the Password (blank by default), and the Device Name (anything you like). After that, hit OK to add your camera to the Reolink Client.
Comments
0 comments
Please sign in to leave a comment.