Applies to: All Reolink PoE NVR.
This article teaches you how to connect and initially setup your PoE NVR with a connected monitor.
Here is a diagram help you know each option on the PoE NVR.
Now, please refer to the following procedures to set up your NVR.
Step 1. Connect the NVR to a Monitor or TV via the VGA or HDMI cable.
Step 2. Connect the camera’s RJ45 network socket to any POE Camera port on the NVR using the Ethernet cables provided.
Step 3. Connect an Ethernet cable from the LAN port on the NVR to LAN port on your router.
Step 4. Connect the mouse to the USB port.
Step 5. Connect the Power Adapter. Please use the supplied power adapter. For POE NVR device, it is 48 volts.
Step 6. And then you will see the below splash screen. System booting up takes a few seconds.
Step 7. Follow the Setup Wizard to set your NVR, click "Next" to continue and at last step, click "Finish" to save your settings.
- Create your password
- Setup language, Video Standard,Resolution,Time Zone,Date Format,Device Name, UID
- HDD Management (Init)
- Network Configuration (DHCP by default)
- Device list
- Email Configuration (Gmail is suggested to use the sender one)