Applies to: All Reolink WiFi NVRs.
Log in your NVR via the monitor, go to Device Settings-> System->Maintenance page:
There are four options on this page.
- Enable auto reboot: check on this option to set the auto reboot for your device.
- Auto reboot at: select the date and time of auto reboot.
- Upgrade: upgrade the firmware of your NVR to the latest one.
Note: Please note you also can upgrade the firmware for the cameras connecting to the NVR via WiFi NVR. - Default Settings: click Restore to restore your device.
Comments
0 comments
Article is closed for comments.