Applies to: C1 Pro/C2 Pro/C1/C2/Reolink Keen
Here is a video for your reference:
The bracket consists of:
- Screw for the camera (With white anti-slip film)
- Screw for the bracket
- Screw cap
- Reinforcement ring
- Bottom component
- Top component
Step 1. Combine the top component and bottom component by one of the screws and the screw cap. As the picture shows,
Step 2. Connect the bracket and the camera with the screw. And install it to the position you want.
Note: You need to add the reinforcement ring to the top component to fix the bracket. Please pay attention to the direction of the screw thread surface on the reinforcement ring. These two parts need to be installed face to face.
Comments
0 comments
Article is closed for comments.