How to Find out System Information via Reolink PoE NVR

Applies to: Reolink PoE NVRs.

The following steps describe how to find the firmware version information of Reolink PoE NVR and the cameras connected to the NVR.

Note: If the UI is different from the following, that will be the new UI on the monitor, you can refer to How to Find out System Information via Reolink PoE NVR ( New UI)

For NVR

Step 1: Log in to the Reolink PoE NVR on a monitor, then click on the button to enter the menu page of the NVR.

Step 2: Click on the System -> System Information button, then you may find the Hw No. and Fw Version on this page.

System Information

For cameras

Go to Menu >> IP channel, select and click the camera you want, and click Detail.

IP Channels

Then you may find the Hw No. and Fw Version on this page.

Model Information

Related articles