Applies to: RLN16-410;RLN8-410;RLN8-410-E, RLN4-210, RLN4-211
When viewing your cameras on a monitor/TV plugged into your NVR, you probably need to reorder the sequence of those cameras. Please follow the steps below to re-arrange the display order for the cameras.
Note: Make sure that you have connected a monitor and a mouse to the NVR before the following steps.
Step 1. Go to Menu -> IP Channel interface, and make sure all the cameras have entered the Previewing status.
Step 2. Expand the selection bar to assign a channel for each camera. After that, click Apply to save the settings.
If you want to re-arrange the display order for cameras which are connected to a Reolink WiFi NVR, please go to the Device List page and refer to Step 2 to finish the setting.
Comments
0 comments
Please sign in to leave a comment.