You can easily control the camera via Reolink App to pan, tilt, and zoom in/out so that to view more corners and expand the surveillance coverage.
Applies to: RLC-423 series, Reolink C2, C2 Pro, E1 Zoom, E1 Outdoor, E1 Outdoor PoE, RLC-523WA, RLC-823A, RLC-823A 16X, Reolink TrackMix series, Reolink Keen, C1, C1 Pro, Argus PT series, Reolink Go PT, Reolink Go PT Plus, KEEN Ranger PT, E1, E1 Pro, RLC-830A, RLC-411 series, RLC-422 series, RLC-511, RLC-522, RLC-511W, RLC-511WA, RLC-542WA, RLC-811A, RLC-842A, RLC-822A, RLC-833A.
Note: Not all the cameras listed above fully support Pan&Tilt&Optical Zoom. You can refer to the table below to know the exact functions they support.
| Functions | Supported cameras |
| Pan&Tilt&Optical Zoom | RLC-423 series, Reolink C2, C2 Pro, E1 Zoom, E1 Outdoor, E1 Outdoor PoE, RLC-523WA, RLC-823A, RLC-823A 16X, Reolink TrackMix series(with zoom only available on the tracking lens) |
| Only Pan&Tilt | Reolink Keen, C1, C1 Pro, Argus PT series, Reolink Go PT, Reolink Go PT Plus, KEEN Ranger PT, E1, E1 Pro, RLC-830A. |
| Only Optical Zoom |
RLC-411 series, RLC-422 series, RLC-511, RLC-522, RLC-511W, RLC-511WA, RLC-542WA, RLC-811A, RLC-842A, RLC-822A, RLC-833A. |
Step 1. Log in to your PTZ/PT camera. Enter the live-view page and tap the PTZ icon to unfold the PTZ menu.
Step 2. Control the PTZ.
- To control pan/tilt, press and hold the Arrows to turn the camera left/right/up/down.
- Tap
and the camera will start an automatic scan by panning, then tap it again to stop the auto scan.
- To control zoom, tap zoom, and tap "+" or "-" to zoom in or out. You could slide the slider to zoom in or out, either.
- To control focus, tap Focus and tap "+" or "-" to focus near or far. Or slide the slider to adjust the focus.
- To adjust the Pan/Tilt speed by tap "+" or "-" on the Speed bar. Or you can slide the slider to adjust this figure quickly. The larger the number, the faster the camera will pan and tilt.