This article will show you how to export/import configuration files via PoE NVRs on the monitor.

Applies to: RLN4-410 (hardware version H3MB17), RLN8-410 (hardware version H3MB02), RLN8-410-E, RLN16-410 (hardware version H3MB02/H3MB06)

Note: Please insert a USB flash drive to the NVR USB port before importing/exporting config files. And the NVR with the new firmware couldn't support the Import function.

Step 1. Log in to your Reolink PoE NVR on your monitor, then go to Menu > System Maintenance.

Step 2. Click Export/Import to enter the Import/Export Settings page.

POE-main-menu.jpg

configuration.png

Step 3. Click Export/Import to export or import config files.

import_or_export_config_files.png