Applies to: Reolink E1 series cameras
Step 1. Drilling two screw holes on the wall according to the mounting hole template.
Step 2. Insert the two plastic anchors into the holes on the wall.
Step 3. Secure the base unit in place by tightening the screws into the plastic anchors.
Step 4. Align the camera with the bracket, then turn the camera unit clockwise to lock it in position.
- Turn the camera anticlockwise to remove it from the wall.
- In case your camera is mounted upside down, the picture will need to be rotated as well. Please go to Device Settings->Display interface, then click Rotation to adjust the image.