Applies to: All Reolink Cameras and NVRs
If your Reolink products are on the same local network (LAN) with your PC, you may follow the steps below to add them to Reolink Client (Mac) with a few clicks.
Method 1. Automatically Add
Launch Reolink Client, and it will automatically scan and add Reolink cameras to Reolink Client by default settings (learn more at here).
Method 2. Manually Add
If the cameras cannot be automatically added to Reolink Client, you may click Add Device >> Search to scan your Reolink device(s).
No devices Detected and Displayed on the List?
Step 2. Double click the Reolink device(s) shown in the list and fill in the information required to log in to the device(s).
If there is still no device listed when clicking Scan Device in LAN, you can also manually enter the camera's or NVR's IP address or UID numbers.
Please refer to this article:
How to Add Cameras or NVRs to Reolink Client by manually enter UID (Mac)
How to Add Camera or NVR to Reolink Client by manually enter IP (Mac)
Comments
0 comments
Article is closed for comments.